LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Knock Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Knock Sensor: Removal

  1. Remove the intake manifold. See 3.2L V6 article.
  2. Disconnect the wire harness connectors at the knock sensors (1) and remove the retaining bolts. Remove the knock sensors from the engine block.
    Fig 1: Removing Knock Sensors
    G01838153Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals