LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Exhaust Gas RECIRCULATION >> Solenoid >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Exhaust Gas RECIRCULATION: Solenoid: Removal

  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing.
  3. Disconnect the solenoid harness connector (1).
    Fig 1: Disconnecting Solenoid Harness Connector & Vacuum Lines
    G01859878Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect the solenoid vacuum lines (2).
  5. Remove the solenoid to valve mounting bolt (2).
  6. Remove the valve to cylinder head mounting bolt (1).
    Fig 2: Removing Solenoid To Valve & Valve To Cylinder Head Mounting Bolts
    G01859879Courtesy of DAIMLERCHRYSLER CORP.
  7. Clean the gasket surfaces. Discard the old gasket. Clean the EGR passages as necessary.
scientia non olet · About LEMON Manuals