LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Accelerator Pedal >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Accelerator Pedal: Installation

  1. Connect the accelerator pedal harness connector.
  2. Slide the accelerator pedal into the bracket and onto the welded stud.
  3. Install the accelerator pedal lower nut (1). Tighten to 15 N.m (11 ft. lbs.).
    Fig 1: Installing Accelerator Pedal Lower Nut
    G01860769Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the plastic nut cover.
  5. Install the accelerator pedal upper nut (1). Tighten to 15 N.m (11 ft. lbs.).
    Fig 2: Installing Accelerator Pedal Upper Nut
    G01860770Courtesy of DAIMLERCHRYSLER CORP.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals