LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution Service >> UNDERHOOD Accessory Fuse Block >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

UNDERHOOD Accessory Fuse Block: Installation

  1. Install the harness connectors to the underhood accessory fuse block.
  2. Push the underhood accessory fuse block down into the box until the rear tabs and the front two tabs connect.
  3. Install the lid.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals