LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> O2 Sensor >> Installation >> Downstream O2 Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Downstream O2 Sensor

  1. Apply anti-sieze compound to the threaded portion of the O2 sensor.
  2. Install the O2 sensor (1). Tighten to 50 N.m (37 ft. lbs.).
    Fig 1: Installing Downstream O2 Sensor
    G01860799Courtesy of DAIMLERCHRYSLER CORP.
  3. Connect the O2 sensor harness connector.
  4. Lower the vehicle.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals