LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Crankshaft Position Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Installation

  1. Install the crankshaft position sensor to the engine tighten to 8 N.m (71 in. lbs.).
  2. Connect the crankshaft position sensor harness connector.
  3. Install the air cleaner housing. See 3.2L V6 article.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals