LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Antilock Brake >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Controller Antilock Brake: Removal

  1. Disconnect battery negative cable.
  2. Raise vehicle.
  3. Disconnect pump/motor connector from CAB (Fig. Fig 1 ).
    Fig 1: Locating CAB Mounting Screws
    G02663507Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove four screws securing CAB to HCU half of ICU (Fig. Fig 1 ). Remove CAB from HCU.
  5. Pull outward on CAB connector lock and disconnect 24-way wiring connector. Remove CAB from vehicle.
scientia non olet · About LEMON Manuals