LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Concorde LXi >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Window Motor >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Window Motor: Installation

  1. Install new motor on regulator by positioning motor gearbox so that it engages regulator sector teeth.
  2. A slight rotational or rocking movement may be necessary to bring three motor gearbox screw holes into proper position.
  3. Install three gearbox screws and one tie down bracket screw, if applicable. Tighten to 5.6 to 8 N.m (50 to 70 in. lbs.) torque.
  4. Install regulator. Using the switch, test operation of motor.
  5. Install trim panel. Refer to appropriate TRIM PANEL installation procedure.
  6. Connect the negative battery cable remote terminal to the to the remote battery post.
scientia non olet · About LEMON Manuals