September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Muffler/Front Resonator Assembly: Installation
- Install left rear resonator/pipe onto new muffler/front resonator (Figure
) or (Figure
), but do not tighten clamp until exhaust system is installed on vehicle.
- 300M Special:
Install right rear resonator/pipe onto new muffler/front resonator (Figure
), but do not tighten nuts until exhaust system is installed on vehicle.
- Install exhaust system (Refer to INSTALLATION
).
- Align exhaust components for proper clearance.
- Tighten all exhaust band clamps to 61 N.m (45 ft. lbs.).
- 300M Special:
Tighten right rear resonator/pipe nuts to 28 N.m (250 in. lbs.) (Figure
).