Fuel Level Sensor: Installation
- Install wires for fuel level sensor in bottom of fuel pump module. Place wires in groove on back side of fuel level sensor.
- While feeding wires into guide grooves, slide fuel level sensor onto fuel pump module until fuel level sensor snaps into place. Ensure tab on fuel level sensor is fully engaged.
- Install each wire up through electrical connector for fuel pump and fuel level sensor. Pull each wire backward until electrical terminal on the wire locks in place. Ensure wires are installed in original location.
- Install Blue locking wedge inside electrical connector for fuel pump and fuel level sensor. See Fig 2. Install electrical connector for fuel pump and fuel level sensor on electrical connector on bottom side of electrical connector mounted on top of fuel pump module. To complete installation, reverse removal procedure. Turn ignition on and check for fuel leaks.