LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Voyager Base, 3.3 3 >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Service & Adjustment Specifications >> Capacities >> Fluid Capacities (DURANGO)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fluid Capacities (DURANGO)

FLUID CAPACITIES (DURANGO)

Application (1) Quantity
Automatic Transmission (Mopar® ATF+4, Type 9602)
Drain & Refill
45RFE/545RFE
2WD (2) 11.0 Pts. (5.2L)
4WD (2) 13.0 Pts. (6.2L)
46RE (2) 4.0 Qts. (3.8L)
Dry Refill
45RFE/545RFE 28.0 Pts. (13.3L)
46RE 9.6-10.0 Qts. (9.1-9.5L)
Cooling System (Includes Heater)
4.7L 13.0 Qts. (12.3L)
5.9L 14.6 Qts. (13.8L)
Crankcase (Includes Filter) (3)
4.7L 6.0 Qts. (5.7L)
5.9L 5.0 Qts. (4.7L)
Front Differential (SAE 75W-90)
C205F 3.5 Pts. (1.7L)
Manual Transmission (4)
NV1500 (2.5L) 4.8 Pts. (2.3L)
NV 3500 (3.9 & 4.7L)
4X2 4.8 Pts. (2.3L)
4X4 4.2 Pts. (2.0L)
Power Steering Fluid (Mopar® ATF+4, Type 9602) (5)
Rear Differential (SAE 75W-90) (6)
8 1/4" Ring Gear (7) 4.7 Pts. (2.2L)
9 1/4" Ring Gear (7) 4.9 Pts. (2.3L)
Transfer Case (Mopar® ATF+4, Type 9602)
NV233 2.5 Pts. (1.2L)
NV244 2.9 Pts. (1.4L)
(1) Approximate quantity listed.
(2) Estimated service refill.
(3) Use an API energy conserving engine oil that is certified for gasoline engines. On 4.7L, use 5W-30 (preferred). On 5.9L, use 10W-30 (preferred).
(4) Use Mopar® manual transmission fluid, P/N 4874464. Proper fluid level is to bottom of fill hole.
(5) Capacity is not available from manufacturer. Fluid level should be at HOT line if vehicle has been operated or at FULL COLD line if vehicle has not been operated within the last 6 hours.
(6) Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar® Trac-Lok Friction Modifier added if lubricant is changed. Fluid capacity includes friction modifier.
(7) Rear differential may be identified by number of bolts on rear cover. The 9 1/4" ring gear has 12 bolts on rear cover. On 8 1/4" ring gear, fill to 1/4" below fill hole. On 9 1/4" ring gear, fill to 5/8" below fill hole.