Stalls When Accelerating

Most likely causes are weak spark or air/fuel mixture problem on acceleration.

1. Connect scan tool to data link connector, located under instrument panel. Turn ignition on. Using scan tool, check for Diagnostic Trouble Codes (DTC). Turn ignition off. If no DTCs exist, go to next step. If DTCs exist, go to appropriate test in SELF-DIAGNOSTICS - SEBRING COUPE & STRATUS COUPE - 2.4L article.
2. Using scan tool, perform actuator test No. 10: EGR SOLENOID. See ACTUATOR TESTS  . If EGR solenoid is not okay, repair or replace as necessary. Recheck idle. If EGR solenoid is okay, check ignition coils, spark plugs, spark plug cables. Check intake manifold gasket, air inlet hose, vacuum lines, and PCV valve. Repair as necessary. Recheck idle.