LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Prowler >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Ignition Control System >> Knock Sensor >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Knock Sensor: Installation

  1. Install knock sensor. Tighten bolt to 10 N.m (7 ft. lbs.) torque. Over or under tightening affects knock sensor performance, possibly causing improper spark control. 
  2. Attach electrical connector to knock sensor.
  3. Install intake manifold plenum and intake manifold. Refer to the ENGINE .
scientia non olet · About LEMON Manuals