LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Prowler >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel Injection System >> Fuel Injector >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Injector: Installation

  1. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
  2. Install retaining clips on fuel injectors.
  3. Push injectors into fuel injector rail until clips are in the correct position.
  4. Position fuel rail over cylinder head, and push rail into place. Tighten fuel rail mounting bolts to 12 N.m (105 in. lbs.) torque.
  5. Connect fuel supply tube quick connect fittings at the rear of intake manifold (Refer to QUICK CONNECT FITTING - INSTALLATION ).
  6. Connect electrical connectors to fuel injectors.
  7. Install intake manifold plenum. Refer to the ENGINE for intake installation.
  8. Connect the battery cable.
  9. Use the DRB to check for leaks.
scientia non olet · About LEMON Manuals