LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Prowler >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Charging System: Generator: Installation

  1. Install generator and loose install upper and lower bolts (Figure ).
  2. Install rear bracket and pencil brace (Figure ).
  3. Torque all bolts, refer to SPECIFICATIONS  .
  4. Connect B+ terminal nut and the filed connector.
  5. Install drive belt to generator.
  6. Tighten belt, refer to specifications in the COOLING .
  7. Install wiring harness to brace and install brace.
  8. Install power steering reservoir to brace.
  9. Install headlamp assembly, refer to the LAMP for more information.
  10. Install body side panel.
  11. Connect negative battery cable.
scientia non olet · About LEMON Manuals