Removal & Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Remove front door trim panel. See DOOR TRIM PANEL . Remove window frame trim. Disconnect power mirror motor wire connector. Remove nuts holding mirror to door.
- Separate mirror from door. Disengage wire harness plug from door. Feed wire harness through door to outside of vehicle. To install, reverse removal procedure. Verify mirror operation before installing trim panel.