Power Window Motor

Remove door trim panel. See DOOR TRIM PANEL under REMOVAL & INSTALLATION. Disconnect window motor connector. Using jumper wires, apply battery voltage across window motor terminals. Motor should operate, unless window is already at maximum travel. Reverse jumper wires. Window should move in opposite direction. If window does not move in either direction, replace window motor.
If motor operates in one direction only, replace motor. See POWER WINDOW MOTOR under REMOVAL & INSTALLATION. If motor grunts and does not move, disconnect window glass from regulator plate. Check window glass, tracks and regulator for sticking or binding. Repair as necessary and recheck system operation.