Stoplight Switch

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the connector.

Check for continuity between the terminals of the switch.

TERMINAL CONNECTOR SPECIFIED CONDITION CHART

MEASUREMENT CONDITIONS	TERMINAL CONNECTOR OF TESTER	SPECIFIED CONDITION
When brake pedal is depressed. (for stoplight circuit)	1 - 2	Less than 2 ohms
When brake pedal is depressed. (for stoplight circuit)	3 - 4	Open circuit
When brake pedal is not depressed. (for auto-cruise control circuit)	1 - 2	Open circuit
	3 - 4	Less than 2 ohms

Fig 1: Disconnecting Connector

Courtesy of DAIMLERCHRYSLER CORPORATION