Auto-cruise Control Setting

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Switch "ON" the MAIN switch.
Drive at the desired speed, above approximately 40 km/h. (25 mph).
Push the auto-cruise control switch in the direction of arrow.
Check to be sure that when the switch is released the speed is the desired constant speed.
NOTE: If the vehicles speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, the auto-cruise control will be cancelled.

Fig 1: Identifying Auto-Cruise Control Switch Direction
Courtesy of DAIMLERCHRYSLER CORPORATION