LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Sebring Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems - Convertible >> Removal & Installation >> Junction Block
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Junction Block

  1. Disconnect negative battery cable. Open driver's door and remove end cap from instrument panel. Remove scuff plate and center bezel. Remove instrument cluster hood. Remove left side knee bolster. Remove steering column cover. Remove silencer. Remove wiring harness connectors from junction block.
  2. Remove 3 junction block screws. Remove junction block from mounting bayonet by pulling straight down. Disconnect BCM wiring connectors. Remove junction block from vehicle. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals