Windshield Washer Switch: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Remove the upper steering column shroud.

Multi-Function Switch Mounting:

3. Remove multi-function switch mounting screws.
4. Disconnect wire connectors. Lift the switch straight up to remove.

INSTALLATION
For installation, reverse the above procedures.
1. Tighten. multi-function switch to column retaining screws to 2.3 Nm (20 in. lbs.) torque.
2. Tighten steering column cover retaining screws to 2 Nm (17 in. lbs.) torque.