October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Driver Mirror Horizontal Sensor Out Of Range High
- Turn ignition off. Disconnect Memory Heated Seat/Mirror Module (MHSMM) harness connector C1. Turn ignition on. Measure voltage at terminal No. 20 (Dark Blue/Yellow wire) at MHSMM harness connector C1. See Figure
. If voltage is greater than 4.5 volts, go to next step. If voltage is 4.5 volts or less, replace MHSMM.
- Disconnect driver's mirror harness connector. Measure voltage at terminal No. 9 (Dark Blue/Yellow wire) at driver's mirror harness connector. See Fig 1
. If any voltage exists, repair short to voltage in Dark Blue/Yellow wire between MHSMM and driver's mirror. If no voltage exists, replace driver's mirror.
Courtesy of DAIMLERCHRYSLER CORP.