LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 >> Diagnostic Tests >> Test VER-1A: Verification Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Test VER-1A: Verification Test

  1. Turn ignition off. Connect or install all previously disconnected connectors and removed components. Go to next step.
  2. Using scan tool, clear all Diagnostic Trouble Codes (DTC). Turn ignition on. Using scan tool, read DTCs. If any DTCs are set, repeat RETRIEVING DIAGNOSTIC TROUBLE CODES  procedure under DIAGNOSIS & TESTING. If no DTCs are set, go to next step.
    3. CAUTION: Ensure brake system has braking capability before road testing vehicle. Ensure scan tool is not in ABS diagnostics mode during road test, or ABS will be disabled.
  3. Road test vehicle for at least 5 minutes. Perform several ABS stops and traction control starts (if equipped). Go to next step.
  4. Using scan tool, read DTCs. If any DTCs are set, repeat RETRIEVING DIAGNOSTIC TROUBLE CODES  procedure under DIAGNOSIS & TESTING. If no DTCs are set and customer's complaint cannot be duplicated, repair is complete.
scientia non olet · About LEMON Manuals