LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System & Trunk Release System >> System Tests >> Door Lock Switch
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Door Lock Switch

  1. Remove door trim panel. See FRONT DOOR TRIM PANEL  or REAR DOOR TRIM PANEL  under REMOVAL & INSTALLATION. Disconnect suspect door lock switch. Check for battery voltage between door lock switch harness connector terminals No. 1 (Pink wire) and No. 3 (Black wire). Place positive lead on terminal No. 1 and negative lead on terminal No. 3. If battery voltage exists, go to next step. If battery voltage does not exist, check fuse No. 19 (10-amp) located in junction block at lower left end of instrument panel. If fuse is okay, repair suspect door lock switch wire circuit. See WIRING DIAGRAMS  .
  2. Check for battery voltage between ground and door lock switch harness connector terminal No. 2 (Dark Blue/White wire). If battery voltage exists, check door lock switch. See DOOR LOCK SWITCH  under COMPONENT TESTS. If battery voltage does not exist, check fuse No. 14 (10-amp) located in junction block at lower left end of instrument panel. If fuses are okay, repair suspect door lock switch wire circuit. See WIRING DIAGRAMS  .
scientia non olet · About LEMON Manuals