October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Driver Mirror Vertical Sensor Out Of Range High
- Turn ignition off. Disconnect Memory Heated Seat/Mirror Module (MHSMM) harness connector C1. Turn ignition on. Measure voltage at terminal No. 7 (Yellow/Orange wire) at MHSMM harness connector C1. See Figure
. If voltage is greater than 4.5 volts, go to next step. If voltage is 4.5 volts or less, replace MHSMM.
- Disconnect driver's mirror harness connector. Measure voltage at terminal No. 7 (Yellow/Orange wire) at driver's mirror harness connector. See Figure
. If no voltage exists, replace driver's mirror. If any voltage exists, repair short to voltage in Yellow/Orange wire between MHSMM and driver's mirror.