October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Courtesy Lights Inoperative With Driver's Door Open
- Turn ignition off. Disconnect driver's door lock motor/ajar switch harness connector. Measure resistance between ground and terminal No. 2 (Black wire) at driver's door lock motor/ajar switch harness connector. See Fig 1
. If resistance is 5 ohms or less, go to next step. If resistance is greater than 5 ohms, repair open in Black wire between driver's door lock motor/ajar switch and ground.
- Disconnect Body Control Module (BCM) harness connector C4. Measure resistance in Tan wire between terminal No. 1 at driver's door lock motor/ajar switch harness connector and terminal No. 4 at BCM harness connector C4. See Figure
and Fig 1
. If resistance is 5 ohms or less, go to next step. If resistance is greater than 5 ohms, repair open in Tan wire between driver's door lock motor/ajar switch and BCM.
- Connect driver's door lock motor/ajar switch harness connector. Open driver's door. Measure resistance between ground and terminal No. 4 (Tan wire) at BCM harness connector C4. If resistance is 5 ohms or less, replace BCM. If resistance is greater than 5 ohms, replace driver's door lock motor/ajar switch.
Courtesy of DAIMLERCHRYSLER CORP.