October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Cylinder Head

Tighten the cylinder head bolts in the sequence shown. Using the 4 step torque-turn method, tighten according to the following torque values:
- Step 1: All to 61 Nm (45 ft. lbs.)
- Step 2: All to 88 Nm (65 ft. lbs.)
- Step 3: All (again) to 88 Nm (65 ft. lbs.)
- Step 4: All an additional 1/4 turn. Do not use a torque wrench for this step.

NOTE: Bolt torque after 90 ° turn should be over 122 Nm (90 ft. lbs.) in the tightening direction.