LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1998 >> Cirrus >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Engine Component Tests - 2.5L Engine >> Ignition System >> Distributor Cap
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Distributor Cap

A resistor is built into distributor cap. Remove distributor cap from engine. Disconnect coil wire. Using a DVOM, measure resistance between distributor cap center button and coil terminal. Resistance should be 5000 ohms. If resistance is not within specification, replace distributor cap. If resistance is within specification, distributor cap is okay.

scientia non olet · About LEMON Manuals