LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1996 >> LHS >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Alternator & Regulator) >> Self-Diagnostic System >> Entering On-Board Diagnostics >> Scan Tool Diagnostic Mode
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Scan Tool Diagnostic Mode

WARNING: This page is about a different car, the 1995 Chrysler New Yorker and 1995 Chrysler LHS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Connect scan tool to Data Link Connector (DLC). DLC is located under center of dash, to right of steering column.
  2. Start engine (if possible). With brake applied, move transmission lever through all positions, ending in Park. Turn A/C switch on and off (if equipped).
  3. Turn engine off. Without starting engine again, turn ignition on. Enter CHARGING MENU. At CHARGING MENU, press "2" key (READ TROUBLE CODES). Press ENTER key. After trouble codes are accessed, refer to TEST TC-1A, CHECKING SYSTEM FOR TROUBLE CODES under SELF-DIAGNOSTIC TESTS.
scientia non olet · About LEMON Manuals