Description & Operation
Electric remote control mirrors are controlled by a single switch assembly, located on driver's door trim panel. The push button switch uses "L" (left) and "R" (right) for mirror selection and a round platform which is tilted in direction of desired mirror movement. See Fig 1.
The motors which operate the mirrors are part of mirror assembly and cannot be replaced separately. All vehicles are equipped with an ignition-off draw fuse which is used when vehicle is originally shipped from factory. This fuse is located behind instrument panel access cover, by driver's door, and helps to prevent battery discharge during storage. This fuse is included in power mirror circuitry and should be checked if mirrors are inoperative.