October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Test VER-1 - Verification Procedure
- Reconnect all components that were previously disconnected. Ensure ignition is off and scan tool is connected. Turn ignition on, engine off. If scan tool screen is blank, go to TEST 2A. If scan tool screen is not blank, go to next step.
- Using scan tool, perform BUS test. If there is a bus failure message on scan tool, go to TEST 1A. If there is no bus failure message on scan tool, select module in question. If scan tool shows NO RESPONSE, go to TEST 1A.
- If scan tool does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.