LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1995 >> LeBaron >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Test 8B >> Left Rear Wheel Speed Sensor Continuity Fault
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Left Rear Wheel Speed Sensor Continuity Fault

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see wiring diagram.
  1. Using an external ohmmeter, check resistance between CAB connector terminals No. 3 (Light Green/Dark Blue wire) and No. 4 (Light Green wire). If resistance is less than 5 ohms, repair Light Green/Dark Blue and Light Green wires for short to each other. Perform TEST VER-1A. If resistance is more than 5 ohms, go to next step.
  2. Disconnect left rear WSS. Connect a jumper wire between chassis ground and terminal No. 2 (Light Green wire) of left rear WSS. Using scan tool in ohmmeter mode, check resistance of CAB connector terminal No. 4 (Light Green wire). If resistance is less than 5 ohms, repair open in Light Green/Dark Blue wire. Perform TEST VER-1A. If resistance is more than 5 ohms, repair open in Light Green wire. Perform TEST VER-1A.