LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1995 >> LeBaron >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Test 14B >> Right Rear Wheel Speed Sensor Continuity Fault
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Right Rear Wheel Speed Sensor Continuity Fault

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see wiring diagram.
  1. Using an external ohmmeter, check resistance between CAB connector terminals No. 1 (Yellow/Dark Blue wire) and No. 2 (Yellow wire). If resistance is less than 5 ohms, repair Yellow/Dark Blue and Yellow wires for short to each other. Perform TEST VER-1A. If resistance is more than 5 ohms, go to next step.
  2. Disconnect right rear WSS. Connect a jumper wire between chassis ground and terminal No. 2 (Yellow wire) of left rear WSS. Using scan tool in ohmmeter mode, check resistance of CAB connector terminal No. 2 (Yellow wire). If resistance is less than 5 ohms, repair open in Yellow/Dark Blue wire. Perform TEST VER-1A. If resistance is more than 5 ohms, repair open in Yellow wire. Perform TEST VER-1A.
scientia non olet · About LEMON Manuals