September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Test VER-3A, Charging System Verification Procedure
- Ensure all engine components are connected. If Powertrain Control Module (PCM) has been changed and vehicle is equipped with anti-theft system, start vehicle at least 20 times to activate anti-theft system. Connect scan tool to PCM DLC, and erase trouble codes.
- Ensure no other charging system problems remain by doing the following:
- Start engine.
- Manually increase engine to 2000 RPM for at least 30 seconds.
- Allow engine to idle and turn engine off.
- Turn ignition off.
- Connect scan tool to DLC and read trouble codes.
- If previously repaired trouble code has reset or another trouble code has set, check all related TECH SERVICE BULLETINS and return to TEST TC-1A, CHECKING SYSTEM FOR TROUBLE CODES if necessary. If there are no other trouble codes, repair is complete.