LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1995 >> LHS >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> On-Vehicle Testing >> Disabling/Enabling Ignition System >> Enabling Ignition System
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Enabling Ignition System

  1. When testing and/or repairs are completed verify battery condition. Recharge battery as required, after starter tests have been completed. Disconnect all test equipment.
  2. On models with conventional distributor ignition, disconnect jumper wire and connect ignition coil secondary wire to distributor cap. On models with direct ignition system, connect coil pack electrical connector. See Figure . On all models, start engine several times to verify malfunction has been corrected.
scientia non olet · About LEMON Manuals