LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1994 >> LHS >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Anti-Lock Brake System) >> Diagnosis & Testing >> DRB Test Functions >> DRB Volt/Ohmmeter Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DRB Volt/Ohmmeter Mode

WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. To access volt/ohmmeter mode of DRB, connect Red volt/ohmmeter test lead to Red port, located on top right of DRB.
  2. To access voltmeter, press VOLT/OHM key once. DRB is now in voltmeter mode. Touch test probe to connector or wire to be measured. Voltage reading will be displayed on DRB screen. When voltage testing is complete, press VOLT/OHM key 3 times to exit voltmeter mode.
  3. To access ohmmeter, press VOLT/OHM key twice. DRB is now in ohmmeter mode. Touch test probe to connector or wire to be measured. Resistance reading will be displayed on DRB screen. When resistance testing is complete, press VOLT/OHM key twice to exit ohmmeter mode.
scientia non olet · About LEMON Manuals