LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1990 >> Imperial >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> On-Board Diagnostics >> DRB-II Problems & Error Messages >> NO RESPONSE Message
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

NO RESPONSE Message

  1. Ensure ignition is turned on. Disconnect SBEC 60-pin connector. Using an ohmmeter, check Pink wire of diagnostic connector for continuity to SBEC 60-pin connector cavity No. 25.
  2. Check Light Green wire of diagnostic connector for continuity to SBEC 60-pin connector cavity No. 45. If continuity is not present, repair circuit as necessary. If continuity is present, replace SBEC. Attempt retest.
scientia non olet · About LEMON Manuals