October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Output Signal Chart Step 1
- Turn ignition switch to "LOCK" position. Remove large and small harness connector from ECU. On ECI Checker (MD998451
for Chrysler Motors models), set check switch to "OFF" position and select switch to "A" position.
- Connect White connectors (labeled "CHECKER") of Harness Connector (MD998452
for Chrysler Motors models) to ECI checker. Connect harness connector to ECU and body side harness connectors. See Figure. Perform checks according to appropriate ECI SYSTEM OUTPUT SIGNAL CHART-STEP 1.