Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Install the side view driver information camera (4) into the side view driver information camera bezel (3).
Side View Driver Information Camera Bracket (2) - Install

CAUTION:

Refer to Fastener Caution .

Side View Driver Information Camera Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Install the side view driver information camera assembly (1) into the outside rearview mirror housing.
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector. (1)
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Outside Rearview Mirror Actuator (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Outside Rearview Mirror Actuator Bolt (1) - Install and tighten [3x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Outside Rearview Mirror Housing Upper Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Outside Rearview Mirror Housing Bezel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

outside rearview mirror housing bezel Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Support module from back side and fully install plug (1).
Connect all electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Carefully align the outside rearview mirror glass (1) retainers with the outside rearview mirror actuator (2).
Courtesy of GENERAL MOTORS COMPANY

Place one hand on the back of the mirror housing and carefully apply pressure to outside rearview mirror glass (1) until outside rearview mirror glass is fully secured.
Remove the masking tape from the outside rearview mirror glass (1).
Inspect the outside rearview mirror for proper operation.
{UKL} Perform the necessary initialization procedure. Surround Vision Camera Calibration (cameras wired to K124 Image Processing Module) , or Surround Vision Camera Calibration (cameras wired to A11 Radio)