Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Frame Rear Applique (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer To Fastener Caution .

Front Side Door Window Frame Rear Applique Bolt (1) - Install And Tighten [2X] - fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Install By Pressing Down Firmly On The Front Side Door Window Belt Reveal Molding (1) Until Seated To The Pinch-Weld Flange On The Door Panel.
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Belt Reveal Molding Bolt (1) - Install And Tighten - fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Do Not Slide The Molding.

Spray The Front Side Door Weatherstrip With A Suitable Lubricant To Assist In Installing The Front Side Door Upper Reveal Molding (1) Onto The Center Of The Weatherstrip.
Front Side Door Window Upper Reveal Molding (1) - Install