LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Traverse Z71 >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Assistance Systems >> Repair Instructions >> Advanced Parking Assist Front Object Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. GM6398048Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia (1) - Remove - Front Bumper Fascia Removal and Installation (Base) , or Front Bumper Fascia Removal and Installation (Z71)

  2. GM6397884Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Front Bumper Fascia Outer Air Duct Bolt (1) - Remove [2x]

  3. GM6397974Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Release the retaining tabs.

  4. Front Bumper Fascia Outer Air Duct (1) - Remove
  5. GM6397874Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia / bumper body color.

    Lift the locking tabs on the housing and remove the advanced parking assist front object sensor (1).

  6. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals