LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2022 >> Malibu RS >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> B218L Side Object Sensor Module - Left: Programming and Setup >> Replace and Program ECU or Reprogram ECU
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program ECU or Reprogram ECU

NOTE:

When programming the B218L Side Object Sensor Module - Left, it is also necessary to program the B218R Side Object Sensor Module - Right to ensure software compatibility between the two modules. This is done automatically when selecting the B218L/R Side Object Sensor Module Sequential Programming function within SPS.

To program a replacement or an existing ECU, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select B218L/R Side Object Sensor Module and follow the on-screen instructions.
  3. At the end of programming, be sure to clear any subsequent DTCs that may be present.
scientia non olet · About LEMON Manuals