July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Position the bracket (6) to the transfer case.
Install all bolts (1, 2, 3, 4, 5) finger tight.

CAUTION:

Refer to Fastener Caution .

Tighten bolts (1, 2, 5) to 22 N.m (16 lb ft).
Tighten bolts (3, 4) to 58 N.m (43 lb ft).
Install the right wheel drive shaft. Front Wheel Drive Half Shaft Replacement - Right Side (AWD)