Removal Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Use a small flat-bladed tool to pull and release the rear compartment lid latch cover (1).
- Rear Compartment Lid Latch Cover (1) - Remove
Use a small flat-bladed tool at the top of the rear compartment lid hinge cover (1) to release the hinge cover retainer (2) on both sides of the vehicle.
- Rear Compartment Lid Hinge Cover (1) - Reposition [ 2x ]
Rear Compartment Lid Inner Panel Trim (1) - Remove
- Use a flat-bladed plastic tool to disengage the push-in retainers from the sheet metal.
Release the retaining tabs.
- Low Frequency Rear Compartment Antenna (1) - Remove
- Disconnect the electrical connector.
NOTE:
The rear compartment lid hinge cover does not need to be removed from the vehicle.