Installation Procedure

WARNING: This page is about a different car, the 2020 Chevrolet Bolt EV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Battery Positive Post Terminal (2) @ Battery Distribution Fuse Block (1) - Install
Battery Positive Cable (3) @ Battery Distribution Fuse Block (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Battery Distribution Fuse Block Nut (1) - Install and tighten 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Body Wiring Harness Connector (2) @ Battery Distribution Fuse Block - Connect
Body Wiring Harness Nut (1) @ Battery Distribution Fuse Block - Install and tighten 5 N.m (44 lb in)
Courtesy of GENERAL MOTORS COMPANY

Battery Tray Support (2) - Install
Battery Tray Support Nut (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable Protective Cover (1) - Install
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection