Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Install the battery current sensor (2) onto the battery negative cable (1) as shown.
- CAUTION:
Refer to Fastener Caution .
Install the battery negative cable to the frame rail and tighten the battery negative and positive cable ground nut (3) to 22 N.m (16 lb ft).
- Connect the body harness connector (1) to the battery current sensor (2).
- Install the battery. Refer to Battery Replacement .