Body Control Module Bracket Replacement

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Body Control Module Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the instrument panel knee bolster assembly. Refer to Instrument Panel Knee Bolster Replacement . Detach the instrument wiring harness junction block from the I/P tie bar. Remove the steering column lower support bracket bolt and upper support bracket nuts and lower the steering column to access the body control module bracket nuts. Refer to Steering Column Replacement .
1	Body Control Module Bracket Nut (Qty: 3) CAUTION: Refer to Fastener Caution .
2	Body Control Module Bracket Procedure After removing the bracket transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the instrument panel knee bolster assembly. Refer to Instrument Panel Knee Bolster Replacement .
Detach the instrument wiring harness junction block from the I/P tie bar.
Remove the steering column lower support bracket bolt and upper support bracket nuts and lower the steering column to access the body control module bracket nuts. Refer to Steering Column Replacement .

Body Control Module Bracket Nut (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Body Control Module Bracket
Procedure
After removing the bracket transfer components as necessary.