September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Remote Control Door Lock Receiver Replacement (4NB)
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
Preliminary Procedure
High Mount Stop Lamp Electrical Connector - Disconnect |
| 1 |
Remote Control Door Lock Receiver Procedure
- Working from underneath of back upper panel.
- Remove and install the remote control door lock receiver through the back upper panel center hole.
- Disconnect the electrical connector.
- Perform the necessary programming and setup procedure:Control Module References
|