LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Programming And Setup - All Systems) >> Repair Instructions >> Instrument Cluster Programming and Setup >> Replace and Program ECU or Reprogram ECU
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program ECU or Reprogram ECU

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing ECU, perform the following procedure:

  1. Install EL-49642  SPS programming support tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select Instrument Cluster - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select Instrument Cluster - Setup and follow the on-screen instructions.
  5. On the SPS Supported Controllers screen, select Instrument Cluster - Configuration and follow the on-screen instructions.
  6. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals