LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery (1) into the battery tray.
    Fig 1: Battery Bracket Bolt And Battery Bracket
    GM4009331Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery bracket (3) and tighten the battery bracket bolt (2) to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Install the battery positive cable (2) to the battery and tighten the battery positive cable junction block post nut (1) to 6 N.m (53 lb in).
    Fig 2: Battery Positive Cable Junction Block Post Nut
    GM4009330Courtesy of GENERAL MOTORS COMPANY
  4. Install the battery positive cable junction block cover (1).
    Fig 3: Battery Positive Cable Junction Block Cover
    GM4009332Courtesy of GENERAL MOTORS COMPANY
  5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals